TDA-910 Air Jet Loom

Air jet loom

TDA-910 air jet loom has enhanced frame and beam rigidity, and our air jet loom has good stability, beating-up mechanism with further optimization, structure is more reasonable, can use four or six Linkage Beating-up connecting rod. The six connecting rod beating-up can prolong the time for opening of warp, weft, more suitable for wide loom weaving fabric, broaden the scope of weaving width.

Download Catalogue

Tongda TDA-910 air jet loom has enhanced frame and beam rigidity, and our air jet loom has good stability, beating-up mechanism with further optimization, structure is more reasonable, can use four or six Linkage Beating-up connecting rod. The six connecting rod beating-up can prolong the time for opening of warp, weft, more suitable for wide loom weaving fabric, broaden the scope of weaving width.The opening mechanism of this type of crank optional: opening, cam, electronic dobby, jacquard, with electronic let-off, electronic take-up, variable density of weft knitting; warp stop, double weft electronic length measuring, electronic weft storage, selvage yarn breaking detection, edge detection by catching weft yarn electronic control, make the operation more humane.
Its structure is reasonable : the further optimization of beam structure, change the warp tension sensing more sensitive. After the tension roller bracket installed in the outer side of the frame, which is convenient for installation and repair.
The series of looms due to its high rigid frame structure, suitable for weaving high density, high fine fabric, and a let-off, take- up and each detection unit, are used in electronic control, can effectively reduce the stop block, the mechanical stop, warp, weft weaving defects such as short rates, improve the quality of production.

Reed space150, 170, 190, 230, 280, 340 (cm )
The maximum number of weft insertionmaximum weft insertion
Rate can reach 1235m/min (depending on fabric types);
Weft

short fiber7 to 60tex ( 80 to 10Ne ) 

(need additional device if below 10)

Long fiber5 to 44tex (40 to 400den );
The main transmission 

use AC starting torque motor direct starting,

slow forward and reverse running

Shedding crank, cam, electronic dobby, jacquard
Beating-up

bilateral four connecting rod, the six

 connecting rod beating-up

Let-off electronic let-off
Take upelectrical
Stops6 lines of electronic stopping device
Weft stopdouble weft detection
Weft supplysingle color, two-color,four-color mixed free weft, weft
Sevageleno (rough and plain)
Electrical control

using programmable computer controller as the

 core,Can set all kinds of weaving parameters

Lubrication

 the big gear, let-off, take-up gear box with the oil bath type lubrication, 

the other by forced centralized oil supply mode

Power4750px:2.6kw,5750px:2.8kw,7000px:3.7kw


If you have any questions, feedback or comments, please fill out the form below and we will reply you back as soon as possible.