TDGA528 Direct warping machine

Warping machine

The machine is suitable for warping various kinds of yarns,including worsted yarn,high 

twisted flaments,yarn for colorwoven fabric,for silk fabric,for toweling fabric and fabric in special 

industry.This machine,which can match water-jet,air-jet,rapier and projectile loom,is the equipment

for preparation before weaving.

Download Catalogue

>the traverse of warping operation panel is accurately controlled by servo motor.The staring point 

setting and stripe setting can be achieved automatically once by pressing the button.

>The forward and back movement of warping operation panel is controlled by a step motor,so that 

the distance between space reed and yarn on drum is consultant and the distance is optional.

>To keep the yarn on the drum can gain constant speed when winding and unreeling,the new 

technology,AC frequency converter speed adjustment device,which controlled by computer to 

realize the sleepless monitor,is put into practice.

>The machine is braked by an electronic-mechanical-hydro-pneumatic device during 

warping.the beaming tension control adopted extemal steel strip damping,which eliminates the noise and uneven tension problems occured in the traditional clamping type damping.

The optional automatic power control system can be equipped according to the requirements.

Technical Features:

(1) Working width: 1800-4500(as youe requirements)

(2) Drum diameter:1026mm

(3) Cone angle: 9°(1:6.3)

(4) Cone length:1010mm (for beam flangeφ800mm)

(5) Outer warp jitter: ≤0.10mm

(6) Dynamic balance: accord with GB9239 standard 6.3 grade

(7) Speed:0~150m/min

(8)Warping operation table traversing  servo motor:1.5kw Delta

(9) Warping motor: 3kw

(10) Section traverse speed: 0.001~9.999mm/r

(11) Traverse deviation: ±0.01mm

(12) Stripe&start point location:automatic

(13) Section width: 0-400mm(it can be customized.)

(14) Drum brake:4pcs clamp brake

(15) Brake distance : ≤3m (when speed is 80m/min)

(16) Beaming tension control: pneumatic regulate damping  

(17) Display: 10.4inch colorful touch screen Delta 

Beaming/Warping Machine:

 (1)Type: whole beaming machine

 (2) Motor:18.5KW three phase asynchronous motor 

 (3) Beaming speed: 0~100m/min

 (4) Beaming tension: 0~8000N

 (5) Speed deviation: ≤±1m

 (6) Beam brake: pneumatic, steel tape brake

 (7)Loading&doffing beam: pneumatic, air valve

 (8)Beaming safety: safety bar 

If you have any questions, feedback or comments, please fill out the form below and we will reply you back as soon as possible.