TTPW CROSS LAPPER
Cross lapperThe machine is used to fold or plate the web into multi-layers after carding into the required width and product weight.
From here, the baft of material is ready to transfer to the next process, for example: to needle loom or to the oven.
All cross lapper aprons are driven separately, forward and reverse movement is controlled accurately by PLC and this allows for easy adjustment.
The machine is used to fold or plate the web into multi-layers after carding into the required width and product weight.
From here, the baft of material is ready to transfer to the next process, for example: to needle loom or to the oven.
All cross lapper aprons are driven separately, forward and reverse movement is controlled accurately by PLC and this allows for easy adjustment.
Automatic correction system.
The reciprocal motion is controlled by inverter drive and all components are sealed against oil leakage.
The crosslapper utilizes PLC interface by touch screen and PLC programmable controller to make operating parameters and conditions easy to change, repeat or maintain.
| Input width | <2700mm |
| Output width | (2500-10000) mm |
| Lapping speed | <35m/min |
If you have any questions, feedback or comments, please fill out the form below and we will reply you back as soon as possible.
