Opening machine Overal dimensions (installed safety case LxWxH) | 6280mm×2770mm×1340mm |
Recycling machine Overal dimensions (installed safety case LxWxH) | 8500mm×2510mm×1020mm |
Weight | 1300kg |
Output | 200kg-250kg/h, depending on different material |
Capacity of removing impurities | 6%-10% |
Cylinder diameter | 620-620-250-250-250-250-250-250mm |
Cylinder rotation speed | 37-30-11-7.5-5.5-5.5-5.5-5.5kw |
Power (kw) | Card clothing/pin/Utype |
Wire of cylinder | 1100-1260-2050-2200-2200-2200-2200-2200rpm/min |
FAQ
Q1: What textile waste materials can the TD-1300 process?
A1: The TD-1300 is designed to process cotton fabric clips, textile offcuts, waste yarn, thread waste, old clothes and flax waste. Large fabric pieces should be cut to a suitable feeding size, while metal parts, zippers, buttons and other hard foreign materials should be removed before processing.
Q2: What is the capacity of the TD-1300, and how does it handle unopened material?
A2: The specified output is approximately 200–250 kg/h, depending on the raw material and required recycled-fiber quality. Material that is not completely opened is returned through the airflow system for additional processing, helping improve fiber recovery and material utilization.
Q3: What information is required to receive a TD-1300 quotation?
A3: Please provide the waste material type, fiber composition, feeding size, impurity level, moisture content, required hourly capacity, intended use of the recovered fiber, factory voltage and destination port. Buyers in Middle East and MENA markets should also confirm workshop temperature, dust conditions, installation space and the required spare-parts package.
Product Advantages
1.Compact 200–250 kg/h Recycling Solution
The TD-1300 provides a specified output of 200–250 kg/h, making it suitable for textile mills and recycling plants requiring a compact, medium-capacity solution. Actual output depends on the material composition, waste size and required fiber quality.
2.Independent Reducer Drive Control
Each main driving section is equipped with an independently controlled speed reducer. Operators can adjust the working speed according to different textile waste materials, while reducing problems associated with conventional chain slippage and transmission-component damage.
3.Airflow Recirculation of Unopened Material
Material that is not fully opened during the first processing cycle is transported through airflow pipes back to the opening section for further processing. This recycling arrangement supports more complete material utilization and consistent fiber opening.
4.Enclosed Cleaning and Waste Collection
The cleaning sections are enclosed, and each cleaning cylinder is equipped with a separate waste-collection pipe. This configuration helps control dust, collect removed impurities and maintain a cleaner production environment.
5.Integrated Foreign-Material and Fire Protection
Manual feeding allows operators to identify and remove visible hard foreign matter before it enters the opening section. Fire-protection devices are installed on the cylinders, while airflow conveying replaces conventional bamboo and rubber conveyors to support safer material transportation.
LANGUAGE
