| No. | Product Name and Description | Qty | Unit Price | Total Price |
|---|
| 1 | FA002D disk plucker | 2 | US$7,500 | US$15,000 |
| 2 | AMP 119D multi-route spark diverter for disk plucker | 2 | US$4,400 | US$8,800 |
| 3 | Bar cleaning machine, complete with motor and electrical cabinet | 1 | US$8,500 | US$8,500 |
| 4 | FA106 dust cleaner | 1 | US$10,500 | US$10,500 |
| 5 | TD-1300 airflow recovery machine, including one main fan per machine | 3 | US$11,350 | US$34,050 |
| 6 | Eagle Eyes EE01 metal and spark diverter | 1 | US$8,500 | US$8,500 |
| 7 | 030 condenser | 2 | US$1,000 | US$2,000 |
| 8 | Dust filter | 1 | US$17,000 | US$17,000 |
| 9 | Double-chamber automatic baling machine | 1 | US$18,000 | US$18,000 |
| 10 | Single-chamber baling machine | 1 | US$9,200 | US$9,200 |
| 11 | Ground dragnet, 25 m | 1 | US$3,500 | US$3,500 |
| 12 | 5.5 kW national-standard motor | 9 | US$180 | US$1,620 |
| 13 | 250 pipeline, including heavy impurity and miscellaneous waste discharge system | 6 | US$1,100 | US$6,600 |
| 14 | Electrical cabinet | 3 | US$1,900 | US$5,700 |
| 15 | Motor fan, 7.5 kW | 1 | US$1,150 | US$1,150 |
| 16 | Motor fan, 5.5 kW | 1 | US$750 | US$750 |
| Total FOB Qingdao |
|
| US$150,870 |
MACHINE INFORMATION
Step 1: FA002D Disk Plucker

Application
The FA002D disk plucker operates at the beginning of the opening and cleaning line. It is suitable for cotton, cotton-type chemical fibers and medium-to-long staple chemical fibers. The plucking trolley collects fiber tufts from the bales, and a conveying fan transfers the material through air ducts to the next processing stage.
Main features
Serrated blades arranged in three zones for progressive fiber plucking.
Detachable blades for convenient replacement and maintenance.
Human-machine interface control with anti-jamming protection and automatic stop.
Safety interlocks between the beater and trolley movement.
Flexible telescopic ducts to help reduce air leakage.
Double-wheel trolley drive for stable movement.
Data sheet
| Parameter | Specification |
|---|
| Production capacity | 800 kg/h |
| Maximum bale load | 2000 kg |
| Outer wall diameter | 5130 mm |
| Inner wall type | Rotating type |
| Inner wall diameter | 1300 mm |
| Trolley frame dimensions L × W × H | 2630 × 800 × 1405 mm |
| Trolley rotation speed | 1.160 / 1.667 rpm |
| Beater diameter | 385 mm |
| Beater speed | 720 / 871 rpm |
| Blade type | Serrated blades |
| Plucking angle | 10° |
| Blade tip angle | 60° |
| Blade arrangement | Three zones, 9/14/22 tooth stages from inner to outer |
| Adjustable blade extension | 1.5–9.5 mm |
| Beater height from ground | 30 mm, adjustable |
| Maximum beater height | 1110 mm |
| Intermittent downward stroke | 1–6 mm per cycle, adjustable by timer |
| Continuous lifting time | 1080 mm in 3 min 40 sec |
| Machine weight | Approximately 2000 kg |
Step 2: Bar Cleaning Machine

Application
The bar cleaning machine provides preliminary impurity removal before further opening and cleaning. Spiral rollers loosen and convey the material, allowing impurities such as leaf fragments, shells, sand, stems and stones to separate through the cleaning grid.
Working principle
Material is fed evenly into the roller section. Rotating spiral rollers apply impact and forward conveying action to loosen impurities. The separated impurities pass through the grid under centrifugal force and gravity, while the fibers continue to the next processing stage.
Data sheet
| Parameter | Specification |
|---|
| Adjustable bar gap | 10–25 mm |
| Roller rotation speed | 150–300 rpm |
| Cleaning action | Low-speed impact and impurity separation |
| Power | 7.5 kW |
| Listed production capacity | 600 kg/h |
Step 3: FA106 Dust Cleaner

Application
The FA106 dust cleaner further opens and cleans cotton that has already undergone preliminary opening. Its beater and dust grid loosen fiber tufts and separate impurities before downstream recovery.
Main features
Beater speeds selectable to suit processing requirements.
Triangular dust grid with adjustable spacing.
External handwheel adjustment for the dust grid.
Feed roller speed options for material feeding control.
Condenser-compatible arrangement for material collection and transfer.
Data sheet
| Parameter | Specification |
|---|
| Production capacity | 800 kg/h |
| Working width | 1060 mm |
| Beater blade type | Circular rectangular blades or toothed blades |
| Beater diameter | 610 mm |
| Beater speed | 480 / 540 / 600 rpm |
| Feed roller diameter | 76 mm |
| Feed roller speed | 35 / 45 / 55 / 65 rpm |
| Dust grid type | Triangular dust grid |
| Dust grid spacing at inlet | 11–15 mm |
| Dust grid spacing in middle sections | 6–10 mm |
| Dust grid spacing at outlet | 4–7 mm |
| Dust grid adjustment | External handwheel |
| Cotton storage box dimensions H × W × D | 1375 × 1060 × 330–420 mm |
| Clearance between beater blade and feed roller | 6 mm |
| Main drive motor | Y132S-6, 3 kW, 960 rpm |
| Feed roller drive motor | BWD1-27, FW11-6, 0.75 kW, 14–70 rpm |
| Outlet dimensions L × W | 1060 × 140 mm |
| Overall dimensions L × W × H | 1810 × 1650 × 3875 mm, including condenser |
| Net weight | Approximately 1800 kg |
Step 4: TD-1300 Airflow Recovery Machine

Application
The TD-1300 airflow recovery machine opens soft cotton waste, separates impurities and collects recovered fibers. Three machines are included in the specified production-line configuration.
Working principle
Feed rollers guide the material into the opening section. High-speed toothed rollers loosen fiber bundles, while centrifugal action separates impurities through the dust grid. Fan-assisted conveying then transfers the recovered fibers to the collection section.
Main features
Controlled feeding through the cotton box and feed rollers.
High-speed opening and centrifugal impurity separation.
Adjustable dust grid gap to balance impurity discharge and fiber retention.
Fan-assisted conveying with negative-pressure control.
Integrated fiber collection and material discharge.
Data sheet
| Parameter | Specification |
|---|
| Number of machines in the specified line | 3 |
| Listed capacity per machine | 120–180 kg/h |
| Taker-in roller speed | 1900–2500 rpm |
| Dust grid gap | Adjustable |
| Airflow control | Fan-assisted negative-pressure conveying |
| Power per machine | 20 kW |
| Power supply | 380 V, 50 Hz |
| Equipment length | 4050 mm |
| Equipment width | 1740 mm |
| Main machine height | 1130 mm |
| Recovery unit height | 1740 mm |
| Equipment weight | Approximately 2.5 t per set |
Actual capacity depends on the impurity content and condition of the incoming material.
Step 5: Double-Chamber Automatic Baling Machine

Application
The double-chamber automatic baling machine compresses recovered fibers into bales for handling and storage. Its two chambers alternate between material collection and compression to support continuous production.
Working principle
Material accumulates in one chamber while the other chamber carries out compression and bale preparation. The hydraulic system compresses the fibers, and the control system switches between chambers. Finished bales are discharged before the chamber returns to the feeding position.
Main features
Two chambers for alternating feeding and compression.
Shared hydraulic power unit and main compression cylinder.
Controlled hydraulic pressing for consistent bale formation.
Automatic station switching.
Bale discharge mechanism for finished bale handling.
Data sheet
| Parameter | Specification |
|---|
| Chamber configuration | Double chamber |
| Compression system | Hydraulic |
| Bale weight | 160–200 kg/bale |
| Listed baling capacity | 4–6 bales/h |
| Power | 20 kW |
| Voltage | 380 V |
| Station switching | Automatic |
| Main components | Two chambers, hydraulic power unit, compression cylinder, bale discharge mechanism and control system |
Step 6: Dust Filtration System

Application
The dust filtration system handles fiber-laden air from the production line. It combines initial fiber separation with further dust filtration to support process-air cleaning.
First-stage disc filtration
Air passes through a stainless-steel mesh disc that retains fibers. A rotating suction nozzle removes the collected fibers under negative pressure, and a fiber separator discharges the recovered material.
Second-stage multi-cage filtration
Air from the disc pre-filter passes through long-pile filter media arranged in concentric chambers. Dust remains on the filter surfaces while the filtered air passes through. Suction arms remove the accumulated dust and transfer it to the dust collection and compaction equipment.
Main features
Two-stage filtration for fiber separation and dust collection.
Stainless-steel mesh in the disc pre-filter.
Multi-cage structure with long-pile filter media.
Suction cleaning of the filter surfaces.
Alternating suction-arm operation for filter cleaning.
Dust compaction and discharge.
Data sheet
| Parameter | Specification |
|---|
| Power | 35 kW |
| Power supply | 380 V, 50 Hz |
| First-stage filtration | Disc pre-filter with stainless-steel mesh |
| Second-stage filtration | Composite multi-cage filter |
| Second-stage filter media | Long-pile filter material |
| Filter chamber arrangement | Four concentric annular chambers |
| Number of suction arms | 4 |
| Dust discharge | Dust collection and compaction |
Note
The nominal capacity of the complete production line is 450 kg/h. Capacities listed for individual machines refer to those machines only and do not represent the output of the complete line. Actual performance depends on material properties, impurity content and operating settings.
TERMS
1. VALIDITY
This quotation is valid for 30 days from the quotation date.
2. PAYMENT TERMS
50% of the contract value shall be paid by T/T before production. The remaining 50% shall be paid by T/T before delivery. Full payment shall be completed within 15 days after the goods are ready.
3. DELIVERY TERMS
Delivery within 45 working days after receipt of the down payment. Full payment is required before shipment.
4. PACKING
Export-standard seaworthy packing in accordance with the seller’s standards.
5. WARRANTY
The complete machine is covered by a two-year warranty, excluding consumable parts. Costs arising from wear parts, consumables and damage caused by human factors shall be borne by the buyer. The seller shall provide service and technical support.
6. INSTALLATION
The seller shall provide installation, commissioning and operator training services. The buyer shall cover the seller’s engineer’s round-trip airfare, meals, accommodation, local transportation, communication and medical expenses. The buyer shall also pay a technical service fee of USD 100 per day per engineer.
7. OTHERS
All taxes, duties and government charges incurred in China during the execution of this project shall be borne by the seller. Those incurred outside China shall be borne by the buyer.