All Eelectric Palm Frame Upper Shaft Vehiclle TD-1000SD

FAQ

Q1: What is the TD-1000SD electric warp beam carrier used for?

A1: It is used to move, lift, align and mount a warp beam together with a heald frame on compatible weaving looms. It is weaving-room handling equipment rather than a fabric-production machine.

Q2: Which looms and beam sizes are covered by the published data?

A2: The page lists 190-type and larger water-jet, air-jet and rapier looms, carrying-capacity options of 1000–2500 kg and beam flange diameters of 800–1250 mm. Final compatibility depends on the loom and beam drawings.

Q3: What information is required for a technical proposal?

A3: Please provide the loom brand, model, working width, beam weight, flange diameter, barrel length, shaft-end dimensions, heald frame size and weight, mounting height, aisle width and workshop drawing. Middle East projects should also confirm charger input, local frequency, ambient temperature and service requirements.

Product Advantages

1. 1.Integrated Beam and Heald Frame Handling

The TD-1000SD carries a warp beam together with its heald frame during weaving-room preparation. This reduces separate handling steps before the beam assembly reaches the loom.

2. 2.Four Powered Handling Functions

Electric travel, electric lifting, powered beam mounting and electric side shift assist movement and alignment near the loom. The operating sequence should follow the confirmed machine plan and workshop conditions.

3. 3.Carrying-Capacity Options of 1000–2500 kg

Published specifications list carrying-capacity options between 1000 and 2500 kg. The required version depends on the combined beam, yarn and heald frame weight.

4. 4.Beam Flange Range of 800–1250 mm

The published beam flange range is 800–1250 mm. Beam barrel length, shaft-end dimensions, bearing position and mounting height should also be checked before manufacture.

5. 5.Multiple Shuttleless Loom Applications

The published application includes 190-type and larger water-jet, air-jet and rapier looms. Loom brand, model, working width and beam arrangement should be provided for technical matching.