All Electric Double Warp Beam Bucket Type PalmFrame Upper Shaft Vehicle TD-1500DD

FAQ

Q1: What is the TD-1500DD twin warp beam carrier used for?

A1: It is used to move, lift and mount two warp beams together with a heald frame on compatible weaving looms. It is auxiliary beam-handling equipment for weaving-room preparation.

Q2: What carrying range and beam size are published for the TD-1500DD?

A2: The listed carrying range is 1500–4500 kg, with beam flange diameters of 800–1250 mm. Overall machine dimensions are 4600 × 1300 × 1860 mm. Combined load and beam geometry must be checked before manufacture.

Q3: What details are required for a machine proposal?

A3: Please provide the loom brand, model, working width, beam quantity, individual and combined beam weight, flange diameter, barrel length, shaft-end dimensions, beam spacing, heald frame size, mounting height, aisle width and workshop drawing. Middle East projects should also confirm charger input, frequency, ambient temperature and local service requirements.

Product Advantages

1. 1.Twin Warp Beam Handling

The TD-1500DD carries two warp beams as one handling arrangement. This design serves weaving lines that use double warp beams and require coordinated movement toward the loom.

2. 2.Carrying Range of 1500–4500 kg

The published carrying range covers 1500–4500 kg. The required machine version should be based on the combined weight of both warp beams, the heald frame and related components.

3. 3.Bucket-Shaped Cradle Support

The shaped cradle supports the beam bodies during transport and lifting. Beam diameter, spacing, barrel length, shaft-end size and centre of gravity should be confirmed before manufacture.

4. 4.Powered Travel, Lifting and Beam Mounting

Electric travel, electric lifting and powered beam mounting help reduce manual handling during movement and loom preparation. Operating speeds and lifting travel should be confirmed in the technical agreement.

5. 5.Air-Jet and Rapier Loom Applications

The published application covers 280-type to 540-type domestic or imported air-jet and rapier looms equipped with a heald frame. Final matching depends on loom model, working width and beam arrangement.