All Electric Towel Loom Upper Shaft Vehicle TD-800SD

FAQ

Q1: What is the TD-800SD electric warp beam trolley used for?

A1: It is used to carry, lift, align and mount a warp beam on a towel loom. The trolley is auxiliary beam-handling equipment; it does not weave fabric.

Q2: What beam size and weight can the TD-800SD handle?

A2: Published data gives a carrying capacity of 1000 kg and beam flange diameters of 800–1250 mm. The final match should be checked using the beam barrel length, shaft-end size, mounting height and centre of gravity.

Q3: What details are needed for a technical proposal?

A3: Please provide the towel loom brand and model, beam weight, flange diameter, barrel length, shaft-end dimensions, mounting height, aisle width, floor condition and workshop drawing. Middle East buyers should also confirm charger voltage, frequency, battery data and local service needs.

Product Advantages

1. 1.1000 kg Beam Handling Capacity

The published carrying capacity is 1000 kg, supporting heavy warp beam movement and mounting work in towel weaving mills. The beam weight and centre of gravity should be checked before use.

2. 2.Four Powered Movement Functions

Electric travel, electric lifting, powered beam mounting and electric side shift reduce the manual force needed during transport and alignment.

3. 3.Side-Shift Alignment at the Loom

Powered lateral movement helps align the beam journals with the loom mounting points when space around the loom is limited. Final clearance depends on aisle width and machine layout.

4. 4.Beam Flange Range of 800–1250 mm

Published data lists beam flange diameters of 800–1250 mm. Beam barrel length, shaft-end diameter and bearing position should also be checked against the trolley and loom drawings.

5. 5.Application for Larger Towel Looms

The page identifies 190-type and larger domestic or imported double-layer looms using a single-beam arrangement. Compatibility should be checked with loom and beam drawings before production.