All Electric Warp Knitting Machine Upper Shaft Vehicle TD-700A

FAQ

Q1: What is the TD-700A beam trolley used for?

A1: The TD-700A is used to move, lift and align warp beams during warp knitting machine preparation. It is auxiliary beam-handling equipment and does not knit fabric.

Q2: What beam weight and flange diameter are covered?

A2: Published data lists carrying-capacity versions of 700–1500 kg and warp beam flange diameters of 500–762 mm. The page also gives a beam center height of 2200 mm and an aisle figure of 1900 mm.

Q3: What information is needed for a technical proposal?

A3: Please provide the warp knitting machine brand, model, machine type, working width, gauge, beam count, full beam weight, flange diameter, barrel length, shaft-end size, mounting center height, aisle width and workshop drawing. Middle East projects should also confirm charger input, ambient temperature, dust conditions and spare-parts needs.

Product Advantages

1. 1.Electric Beam Handling

The all-electric arrangement assists warp beam movement and lifting during warp knitting machine preparation. The operating layout can be matched with the confirmed beam and machine plan.

2. 2.Carrying-Capacity Versions of 700–1500 kg

Published specifications cover versions between 700 and 1500 kg. The required capacity should cover the full beam, yarn, shaft ends and related fittings.

3. 3.Warp Beam Flange Range of 500–762 mm

The published beam flange diameter is 500–762 mm. Beam barrel length, shaft-end size and bearing location should also be checked before manufacture.

4. 4.2200 mm Beam Center Height

The listed beam center height is 2200 mm. This data should be checked against the actual beam mounting position of the warp knitting machine.

5. 5.Project-Based Machine Dimensions

The page lists overall dimensions as project-based and gives an aisle figure of 1900 mm. Machine width, access route, turning area, lift height and workshop layout should be confirmed during technical planning.