| Type | Left-handed |
| Overall dimensions (L*W*H) | 4570*2300*3500 mm |
| Machine weight | 6t |
| Max. delivery capacity | 1800 kg/h per set |
| Total power | 31.5 KW |
| Cylinder motor | 18.5 KW |
| Feeding motor | 1.5 kw (frequency control) |
| Fan | 5.5 KW |
| Hair coagulator | 0.75 KW |
| Width of cylinder | 1500 mm |
| Cylinder working diameter | 1200 mm |
| Cylinder speed | 207 rpm/min |
| Doffer speed | 695 rpm/min |
| Working roller speed | 8-36.3 rpm/min |
| Stripping roller speed | 8-36.2 rpm/min |
Fan speed | 844rpm/min |
| Wool feeding flat curtain speed | 2.5-10.5 m/min |
FAQ
Q1: What materials can the BC300 wool mixing machine process?
A1: The BC300 is intended for washed wool and compatible chemical fibres. Fibre length, fineness, bulk density, moisture level and blending ratio should be checked before the machine configuration is confirmed. Raw greasy wool normally needs a suitable scouring process ahead of this machine.
Q2: What is the processing capacity of the BC300?
A2: The published delivery capacity is up to 1,800 kg/h per unit. Actual output varies with fibre type, tuft size, bulk density, moisture, impurity load, feed curtain speed and connection with other machines in the preparation line.
Q3: What information is needed for a BC300 quotation?
A3: Please share the fibre type, fibre length, fineness, blending ratio, moisture level, required hourly capacity, wool oil dosage, upstream and downstream equipment, machine direction, voltage, frequency and workshop conditions.
Product Advantages
1. 1.Controlled Condenser Feeding
Material enters through a condenser and negative-pressure conveying arrangement. The independently driven feed section uses frequency control, allowing the feed curtain speed to match the fibre condition and planned throughput.
2. 2.Combined Opening and Blending Action
The cylinder, worker rollers, stripping rollers and doffer work together to loosen compressed fibre tufts and mix the material before woollen carding. This arrangement prepares the fibre for the next processing stage.
3. 3.Coordinated Fibre Transfer
The cylinder and doffer operate in coordination to manage fibre movement inside the machine. Working clearances should be set according to fibre length, material condition and processing needs.
4. 4.Stainless-Steel Processing Parts
The listed fan, cylinder, doffer, rollers and toothed components use stainless steel. This material arrangement supports routine cleaning and fibre-contact management during mill operation.
5. 5.Line Capacity for Wool Preparation
The stated delivery capacity is up to 1,800 kg/h per unit, with an installed power of 31.5 kW. The machine can be connected with fibre mixing, pneumatic conveying and carding equipment according to the planned wool preparation line.
LANGUAGE
