Electric Fork Type Carrier Vehicle TD-1500A-1

FAQ

Q1: What is the TD-1500A-1 used for?

A1: It is intended for transporting and positioning heavy warp beams or weaving beams in a textile mill. The fork structure, powered travel and electric lift are arranged for beam handling near weaving equipment.

Q2: What beam size and load can the vehicle handle?

A2: The published load range is 1500–3000 kg, the listed beam flange range is φ800–1250 mm, and the lifting stroke is 120 mm. Actual compatibility depends on beam length, barrel diameter, journal dimensions and loom geometry.

Q3: What information is needed for a quotation?

A3: Please provide the loom model, nominal width, beam type, loaded beam weight, barrel length, flange diameter, barrel diameter, journal size, loom center height, aisle width, floor slope, local voltage and daily working hours. For Middle East mills, also provide ambient temperature, dust conditions and charging requirements.

Product Advantages

1. 1.1500–3000 kg Beam Capacity

The published carrying range covers beam loads between 1500 and 3000 kg. This gives weaving mills a defined basis for matching the vehicle with the loaded warp beam weight.

2. 2.Fork Type Beam Support

The fork arrangement carries the beam at its designated support points during transport and positioning. Beam journal size and contact geometry should be confirmed before production.

3. 3.Electric Travel and Electric Lift

Powered travel assists long routes within the weaving area, while the electric lifting mechanism provides a 120 mm stroke for beam pickup and height alignment.

4. 4.φ800–1250 mm Flange Range

The listed flange range covers φ800–1250 mm. Buyers should provide the exact flange diameter, barrel length, barrel diameter and end-journal dimensions for technical review.

5. 5.1500 mm Passage Planning

The listed passage requirement is 1500 mm and the overall dimensions are 3100 × 850 × 1450 mm. These figures help engineers check aisle clearance, turning space and approach direction near the loom.