| Production Capacity | s800 kg /h, width 1.60 m |
| Spiked Roller Size | 750 x1594 mm |
| Speed | 766/ 612/ 495 rpm |
| Speed Adjustment | Mechanical/Electrical |
| Frequency Control | Normally 400-800 rpm, generally 770 rpm |
| Dust Bar Type | 68 pcs |
| Setting | 5.5~11 mm |
| Setting Angle | 5°~30°m |
Main Motor | 5.0kw-7.5 kw,1430 rpm |
| Carriage Motor | 0.37kw ,1430 rpm |
| Over All Size | 1992x1132x1960 mm(approx) |
FAQ
Q1: Where is the FA107 used in a cotton spinning line?
A1: The FA107 normally works after the bale plucker and before the multi-mixer. It carries out preparatory opening and removes coarse trash before cotton enters the next blowroom stage.
Q2: What are the main working data of the FA107?
A2: The stated capacity is up to 800 kg/h with a working width of 1.60 m. Roller speed can use pulley settings of 495, 612 or 766 rpm, or inverter control within 400 to 800 rpm. The cleaning section has 68 dust bars.
Q3: What information is needed for an FA107 machine plan?
A3: Please provide the cotton grade, fibre length, moisture, trash content, planned output, upstream machine, following machine, air duct data, waste discharge method, local voltage, frequency and workshop size.
Product Advantages
1.Preparatory Cleaning Before Blending
The FA107 is positioned between the bale plucker and multi-mixer. It opens cotton tufts and removes coarse trash before the material reaches the blending stage.
2.Repeated Saw-Toothed Roller Action
Cotton moves around the opening roller several times. This repeated contact separates compressed tufts and prepares the material for later blowroom processes.
3.Two Roller Speed Methods
The machine can use pulley speed settings of 495, 612 or 766 rpm. Inverter control covers the stated range of 400 to 800 rpm, allowing process tuning for different cotton conditions.
4.Dust-Bar Process Tuning
The cleaning section has 68 dust bars. A gap range of 5.5 to 11 mm and a working angle of 5 to 30 degrees help technicians balance trash removal and fibre care.
5.Waste Discharge Choice
Intermittent or continuous waste discharge can be used in line with the mill process. The arrangement helps move loose trash away during cotton opening.
LANGUAGE
