| Working width | 920 mm |
| Output | 100 kg/h |
| Feed Roller Diameter | 191 mm |
| Installed Power | 3.37 kw |
| Dimension | 1530 x650 x370 mm(approx) |
FAQ
Q1: What is the FA179 chute feeder used for?
A1: The FA179 is used between the blowroom process and the carding machine. It receives opened fibre, distributes the material across the working width and supplies a continuous fibre batt to the card inlet.
Q2: What are the main specifications of the FA179?
A2: The published working width is 920 mm, the stated output is 100 kg/h, the feed roller diameter is 191 mm and the installed power is 3.37 kW. Actual output depends on the raw material, airflow and connected carding machine.
Q3: What information is needed for an FA179 machine proposal?
A3: Please share the carding-machine model, feeding width, raw material, fibre length, required capacity, air-duct size, blower data, voltage, frequency and workshop height. Middle East projects should also provide the ambient temperature and dust-control conditions.
Product Advantages
1.Continuous Card Feeding
The FA179 receives opened fibre after blowroom processing and delivers it continuously to the carding machine. This arrangement helps reduce interruptions caused by uneven manual feeding.
2.Uniform Fibre Batt Preparation
The chute distributes loose fibre across the 920 mm working width before it reaches the card inlet. Controlled delivery supports a more even fibre batt for the following carding process.
3.Output Matched to Carding Requirements
The published output is 100 kg/h. This capacity can be matched with the production requirement of the connected carding machine and the material flow of the blowroom line.
4.Controlled Feed Roller Movement
The machine uses a 191 mm feed roller to guide fibre into the carding section at a measured rate. Proper feeding helps manage sudden changes in fibre volume at the card inlet.
5.Pneumatic Blowroom Connection
Fibre moves through ducting into the chute feeding section, reducing manual material transfer between processes. The final arrangement can be planned according to the air duct, card model and workshop conditions.
LANGUAGE
