| Number of Doubling | 24/28/32 |
| Drafting Mode | 3 over 3, or latest |
| Pnuematic Weight Pressure | 380-550 N |
| Lap Speed | 80-120 m/min |
| Output in Theory | 350 kg/h |
| Full Lap Package Weight | 22 kg |
| Total Draft Ratio | 1.80 times |
| Adopting PLC to control the machine, the touch screen can be displayed. The parameter and operation guide; inverter drives the main motor that is easy to set the speed of machine; during the lapping, the speed of main motor is reduced, which reduces the blocking. |
| Proportional valve for the pressure of sliver, which confirm the right pressure and the pressure can be displayed in the touch screen. |
28 Pcs sensor which monitor the sliver and the machine will be stopped while there is no sliver, broken sliver and sliver stop. |
| Feed Mode | Two sides gantry creel, simple frame and less floor space |
Roller |
| Lap Spool | Nylon Ф200x300 (mm) |
| Lap Width | 300 mm |
| Inverter | DELTA or equivalent. |
| Cone for uni-lapper is 96 pcs. |
Electric Control | PLC touch screen |
Suction mod | Exhaust |
upper (with suction motor) with three |
Semi-automatic Trolly Machine Color | Standard blue and white. |
FAQ
Q1: What is the FA360B lap former used for?
A1: The FA360B combines 24, 28 or 32 cotton slivers, applies a light draft and winds the material into a 300 mm lap for the combing section. It is installed between draw-frame preparation and the cotton comber.
Q2: What output and lap package does the FA360B provide?
A2: Published data lists a lap speed of 80–120 m/min, theoretical output of 350 kg/h and a full package weight of 22 kg. Mill output depends on sliver linear density, cotton condition, lap setting, operator practice and the next machine.
Q3: What details are needed for an FA360B machine proposal?
A3: Please provide cotton type, input sliver count, sliver linear density, required lap weight, comber brand and model, planned working hours, local voltage, frequency, air supply, exhaust needs and mill dimensions. Middle East projects should also state room temperature, humidity and dust-control conditions.
Product Advantages
1.Flexible Sliver Doubling
The FA360B can work with 24, 28 or 32 slivers. The two-side gantry creel keeps the feed path compact and helps mills plan the creel around the chosen doubling count.
2.Controlled Drafting and Pressure
The three over three drafting arrangement has a total draft ratio of 1.80. Pneumatic loading covers 380–550 N, while proportional-valve pressure data can be viewed on the touch screen.
3.Defined Lap Package
The machine forms a 300 mm lap on a nylon spool measuring Ø200 × 300 mm. The published full package weight is 22 kg, supporting planned lap handling between preparation and combing.
4.Sliver Condition Monitoring
Sensors check the sliver feed during operation. If a sliver is absent, broken or not moving, the machine halts to limit an incomplete lap entering the next process.
5.PLC and Inverter Operation
PLC control presents machine data and operating guidance on the touch screen. The inverter-driven main motor allows speed setting, while reduced drive speed during lapping helps limit material blockage.
LANGUAGE
