Width of flat:33.3mm
Length off lat:1020-1500mm
Power:380V50HZ/3.8KW
Packing size:2100×750×1600mm
G/n weight:1260/1100kg
FAQ
Q1: What is the TDM-KV flat end milling machine used for?
A1: The TDM-KV is used to machine worn or uneven end-seating surfaces on carding-machine flat bars. It helps restore the original heel and toe geometry before flat clothing installation or card reassembly. It is not designed for grinding the wire points of flat clothing.
Q2: What card flat bar sizes can the TDM-KV process?
A2: The published specification lists a flat bar width of 33.3 mm and a compatible length range of 1020–1500 mm. Final suitability depends on the carding-machine model, flat bar profile, end shape, required milling angle and dimensional tolerance.
Q3: What information is required to receive a TDM-KV quotation?
A3: Please provide the carding-machine brand and model, flat bar length, width, end profile, heel and toe angle, flat bar material and required machining tolerance. Buyers should also confirm the factory voltage, cutter and fixture requirements, spare tooling, installation service and destination port for Middle East or other MENA projects.
Product Advantages
1.Program-Controlled Milling Process
The TDM-KV uses a programmed operating system to control the flat end milling process. This supports repeatable machining and helps reduce dimensional variation caused by manual operation.
2.Accurate Heel and Toe Restoration
The machine is designed to mill the worn end-seating surfaces of card flat bars. Accurate end machining helps restore the required heel and toe geometry before flat clothing installation and card assembly.
3.Alloy Milling Cutters
High-strength alloy milling cutters support accurate material removal and consistent end-face machining. Cutter specifications should be selected according to the flat bar material and required milling angle.
4.Fast and Rigid Flat Clamping
The dedicated clamping system holds the flat bar firmly during milling, helping reduce movement and simplifying loading, positioning and unloading between processing cycles.
5.Suitable for Multiple Carding Applications
The TDM-KV processes flat bars with a specified width of 33.3 mm and lengths from 1020 to 1500 mm. It can support card maintenance for conventional spinning, open-end spinning and nonwoven production lines.
LANGUAGE
