Jersey Circular Knitting Machine,Circular Knitting Machine,Computerized Circular Knitting Machine,Automatic Circular Knitting Machine

FAQ

Q1: What is the difference between an open-width machine and a tubular double jersey machine?

A1: A tubular machine collects knitted fabric as a closed tube. An open-width machine handles the fabric in flat form before collection, helping limit center crease marks and preparing flat rolls for later processing.

Q2: What diameter, gauge and feeder options are available?

A2: The published TD series covers diameters of 30 to 54 

inches, gauges of 12G to 50G and feeder quantities of 48 to 156. The suitable configuration depends on yarn count, fabric structure, GSM, finished width and required output.

Q3: What information is needed for a TD open-width machine quotation?

A3: Please provide the yarn material, yarn count, fabric structure, fabric GSM, finished open width, required output, roll diameter, take-down requirements, local voltage, frequency and workshop conditions. A fabric sample or construction sheet will help verify the machine configuration.

Product Advantages

1. 1. Open-Width Fabric Collection

The open-width system handles knitted fabric in flat form after the knitting area. This helps limit center crease marks during fabric collection and later processing.

1. 2. Broad Diameter Range

Machine diameters cover 30 to 54 inches. The diameter can be matched with the required fabric width and fabric processing plan.

1. 3. Gauge Options up to 50G

The published gauge range covers 12G to 50G. Fine-gauge configurations can be prepared for small loop structures when the yarn count and needle type match the fabric specification.

1. 4. Multiple Feeder Configurations

The TD series provides 48 to 156 feeder arrangements. Actual production capacity depends on machine diameter, feeder quantity, rpm, yarn and fabric construction.

1. 5. Flat Rolls for Later Processing

Open-width fabric collection prepares flat rolls for inspection, dyeing, printing or finishing. Roll diameter, fabric tension and usable width should be confirmed in the machine data.