Hydraulic Adjustable Upper Shaft Carrier Vehicle TDC-400C

FAQ

Q1: What is the TDC-400C used for?

A1: It is a hydraulic trolley used to carry and position warp beams during preparation for 56, 64 and 75 inch looms. Its published carrying capacity is 400 kg.

Q2: What beam flange sizes can the TDC-400C handle?

A2: The current product data lists the beam-disc value as 500 (600) mm. Please provide the flange diameter, barrel length, tube diameter and beam drawing so the working arrangement can be confirmed.

Q3: What information is needed for a TDC-400C quotation?

A3: Please provide the loom brand and model, nominal loom width, beam dimensions, loaded weight, lifting height, aisle width and floor condition. Middle East projects should also include workshop temperature, dust level and daily operating hours.

Product Advantages

1. 1.Hydraulic Beam Lifting

The hydraulic mechanism assists beam raising and lowering during loom preparation. It reduces direct manual handling when a beam is moved or aligned beside the loom.

2. 2.Three Published Loom Widths

The product page lists 56, 64 and 75 inch loom formats. The exact loom brand, frame structure and beam position should be checked before production.

3. 3.Movable Beam-Carrying Structure

The carrying arms can be set around the confirmed beam geometry. The published beam-disc reference is 500 (600) mm and should be verified against the flange drawing.

4. 4.400 kg Rated Capacity

The trolley has a published carrying capacity of 400 kg. Beam weight, yarn load and shaft-end components should all be included when checking the planned load.

5. 5.Compact Mill Access

The listed passage width is 1000 mm, while the overall dimensions are 1600 × 620 × 980 mm. These figures help mill planners review aisle access, turning room and loom-side clearance.