Hydraulic Double Beam Bucket Box Axis On The Bus TDC-1500A-1

FAQ

Q1: What is the difference between the TDC-1500A-1 and a single-beam trolley?

A1: The TDC-1500A-1 has two cradle support areas for a twin warp beam arrangement. It is intended for double-beam loom preparation, while a single-beam trolley handles one beam position.

Q2: Which looms can use the TDC-1500A-1?

A2: Published information covers 280-series and larger domestic or imported air-jet, rapier and gripper-shuttle double warp beam looms. Final compatibility depends on the loom width, beam layout and shaft dimensions.

Q3: What data is required for a technical proposal?

A3: Please provide the loom brand and model, working width, beam barrel length, flange diameter, shaft-end drawing, beam center spacing, individual and combined loaded weights, lifting position, aisle width and floor conditions. Middle East buyers should also state ambient temperature and dust conditions.

Product Advantages

1. 1.Twin Warp Beam Handling

The TDC-1500A-1 is arranged for double warp beam looms. It allows two beam positions to be included in one handling plan during loom preparation and beam installation.

2. 2.Two Cradle Support Areas

The trolley uses two curved cradle areas for the beam arrangement. Beam diameter, center spacing and shaft geometry should be matched with the final trolley drawing.

3. 3.1500 kg Carrying Capacity

The published carrying capacity is 1500 kg. Technical confirmation should state whether this figure applies to the combined load and should include both beams, yarn packages and shaft fittings.

4. 4.Beam Flanges Between Φ800 and 1100 mm

The published beam flange range is Φ800–1100 mm. Beam barrel length and shaft-end dimensions should also be provided before production.

5. 5.Wide-Loom Layout Reference

The listed application begins with 280-series looms. A 1700 mm aisle figure and overall dimensions of 4910 × 1150 × 1700 mm help buyers review floor area and movement routes.