Hydraulic Skip Bucket Carrier Vehicle TDC-1000B

FAQ

Q1: What does cradle-type warp beam trolley mean?

A1: A cradle-type trolley uses a curved supporting body beneath the warp beam flange. The structure carries the beam during movement and helps align it near the loom mounting position.

Q2: What beam sizes can the TDC-1000B carry?

A2: Published data lists a rated capacity of 1000 kg and beam flange options of 800 and 1000 mm. The loaded beam weight, barrel length and shaft-end geometry should be checked before the trolley plan is confirmed.

Q3: What data is needed for a TDC-1000B proposal?

A3: Please provide the loom brand and model, weaving width, beam flange diameter, barrel length, shaft-end dimensions, empty beam weight, loaded beam weight, required center height, aisle width, floor condition and local operating environment.

Product Advantages

1. 1.Curved Cradle Beam Support

The formed cradle holds the lower section of the warp beam flange during transport and loom-side positioning. This structure has a different use than fork-type and heald-frame gaiting trolleys.

2. 2.Rated Load of 1000 kg

The published rated capacity is 1000 kg. Machine planning should use the combined weight of the beam body, warp yarn package and related beam fittings.

3. 3.Two Published Beam Flange Sizes

The technical data lists beam flange diameters of 800 and 1000 mm. The beam barrel length and shaft-end dimensions should also be checked before production.

4. 4.Compact Loom-Side Dimensions

The trolley measures 1140 × 1050 × 850 mm, with a published aisle figure of 1400 mm. These dimensions assist access planning in the weave room.

5. 5.Application Across Several Loom Types

The published application covers 190-class and larger air-jet, rapier and gripper looms made in China or overseas. Final compatibility depends on the loom and beam drawings.