Hydraulic Upper Shaft Carrier Vehicle TDC-1000A

FAQ

Q1: What is the TDC-1000A hydraulic warp beam trolley used for?

A1: It is used to lift, move and position warp beams in the weaving department. The beam interface should be matched to the loom and warp beam drawings before manufacturing.

Q2: What load and beam flange sizes are listed for the TDC-1000A?

A2: Published data lists 800 and 1000 kg capacity versions, with beam flange options of 800 and 1000 mm. The chosen version must cover the complete loaded beam weight, not only the empty beam.

Q3: What information is needed for a technical proposal?

A3: Please provide the loom brand and model, working width, beam flange diameter, barrel length, shaft-end dimensions, empty and loaded beam weights, required lifting range, aisle width and floor conditions. Please also state the local temperature and dust conditions for a Middle East project.

Product Advantages

1. 1.Long-Frame Beam Support

The long chassis places the handling units near both ends of the warp beam. This arrangement supports controlled movement of wide weaving beams within the confirmed machine range.

2. 2.Hydraulic Lifting Arrangement

The hydraulic mechanism assists beam lifting and lowering during transport and loom-side preparation. The operating method and lifting stroke should be confirmed in the final technical sheet.

3. 3.800 and 1000 kg Capacity Versions

Published specifications list 800 and 1000 kg versions. Capacity planning should use the combined weight of the beam body, warp yarn package and beam fittings.

4. 4.800 and 1000 mm Beam Flange Options

The technical data lists beam flange options of 800 and 1000 mm. Beam barrel length and shaft-end geometry should also be checked before production.

5. 5.Weave-Room Access Planning

The listed aisle figure is 1100 mm, while the overall trolley dimensions are 3010 × 800 × 860 mm. These figures help buyers review access routes and turning space.