Hydraulic Upper Shaft Doffing Carrier Vehicle TDC-600

FAQ

Q1: What is the TDC-600 used for?

A1: The TDC-600 is designed to remove and carry large fabric rolls positioned outside the machine. Its 600 kg load rating and hydraulic lifting structure make it a cloth roll handling unit rather than a warp beam loading truck.

Q2: What should be checked before matching the trolley with a machine?

A2: Confirm roll weight, roll diameter, fabric width, shaft or core dimensions, roll center height, machine-side access, aisle width, floor level and turning area. The listed values are 600 kg, φ600 mm, 1160 mm center height and 1300 mm passage.

Q3: What information is needed for a quotation?

A3: Please provide machine type, fabric roll width, loaded roll weight, outside diameter, shaft or core size, pickup height, travel distance, aisle width, floor gradient and local working conditions. For Middle East mills, also share ambient temperature, dust level and daily shifts.

Product Advantages

1. 1.600 kg Roll Handling Capacity

The TDC-600 is rated to carry fabric rolls weighing up to 600 kg. It is intended for large cloth batches handled at weaving or fabric equipment.

2. 2.1160 mm Roll Center Height

The listed 1160 mm center height gives mills a clear reference when checking the trolley against the roll position on the connected machine. This helps buyers assess loading geometry before purchase.

3. 3.Hydraulic Lifting for Doffing Work

The hydraulic mechanism raises and lowers the supporting arms during roll removal. It reduces direct manual lifting when a full cloth roll leaves the machine-side position.

4. 4.Roll Diameter Up to φ600 mm

The listed roll diameter is φ600 mm. Buyers should compare this figure with the finished roll diameter, shaft ends, core construction and fabric width used in their mill.

5. 5.Dimensions for Mill Layout Planning

The overall size is 2150 × 1700 × 1500 mm, and the listed passage requirement is 1300 mm. These figures help the mill check aisle clearance, turning space and the route between the loom and fabric inspection or storage areas.