Medical Gauze Production Line,Medical Gauze Manufacturing Line,Textile Machinery air jet loom,air jet textile machinery,new condition weaving machine,plant pattern textile loom

FAQ

Q1: Does the TDM-710 produce finished sterile medical gauze?

A1: The TDM-710 weaves cotton gauze and bandage fabric in grey form. Bleaching, washing, drying, slitting, folding, packing and sterilization are completed by downstream equipment according to the required finished product.

Q2: What gauze data is needed for machine planning?

A2: Please provide the cotton yarn count, yarn ply, finished fabric width, ends per centimetre, picks per centimetre, fabric weight, mesh structure, selvedge type and planned daily output.

Q3: What factory utilities are needed for the TDM-710?

A3: The loom requires electrical power and clean compressed air. Please provide the local voltage, frequency, air pressure, compressor capacity, air filtration data and workshop dimensions before the machine setup is prepared.

Product Advantages

1. 1.Double Weft Sensing

Two weft feelers monitor short, long and broken weft conditions. Digital signal processing helps the loom identify yarn faults before they continue across the gauze roll.

2. 2.Automatic Dividing Weft Storer

The automatic storer separates and meters the weft yarn before each weaving cycle. This helps limit yarn tangling and supports repeatable gauze formation.

3. 3.Profiled Reed and Main and Auxiliary Nozzles

The profiled reed works with main and auxiliary nozzles to guide the air stream and weft yarn through the shed. The air path can be arranged around the gauze width and yarn data.

4. 4.Short-Stroke Beating Motion

The four-link beating mechanism uses a short movement to place the weft in light, open gauze fabric. The compact movement helps control vibration during regular operation.

5. 5.Screen-Based Machine Monitoring

Operators can set weaving parameters, view production data, check fault causes and use automatic shed finding through the machine control screen.