no twist automatic warp knotting machine,warp knotting machine,automatic warp preparation machine,warp knotting equipment,textile warping machinery

FAQ

Q1: How does the TD198 no-twist model differ compared with the twist and no-twist version?

A1: This TD198 version is dedicated to untwisted warp yarn. The twist and no-twist version is intended for mills that process both twisted and untwisted yarn conditions. The no-twist machine handles yarn that already has no conventional twist; it does not remove twist during operation.

Q2: What yarn range and working width does the TD198 no-twist knotter cover?

A2: The technical data lists a yarn range of 2S–200S and working widths of 1–4 m. The product page identifies short-staple and long-staple yarn applications. Actual running results depend on fiber type, yarn cohesion, sizing, moisture and warp density.

Q3: What information is needed for a TD198 no-twist machine proposal?

A3: Please provide the loom type, working width, fiber material, yarn count, fiber length, sizing condition, moisture level, total warp ends, warp density and samples of both warp sheets. Middle East buyers should also share the local mains voltage, frequency and needed 36 V DC supply arrangement.

Product Advantages

1. 1.Dedicated Handling for Untwisted Warp Yarn

The TD198 no-twist version is intended for warp yarn without a conventional twist structure. Its working arrangement addresses yarn that can spread or lose cohesion during warp preparation.

2. 2.Direct Operation Across Confirmed Yarn Counts

Within the confirmed yarn scope, the machine is designed to work without routine mechanical changes when yarn count varies. Sample trials remain important for unusual fiber, sizing or moisture conditions.

3. 3.Short-Staple and Long-Staple Yarn Applications

The published product information identifies both short-staple and long-staple yarn applications. Final compatibility should be checked with the actual old-warp and new-warp samples.

4. 4.Movable Frame for 1–4 m Warps

The external-warp working mode uses a movable frame for widths between 1 and 4 m. The frame plan should match the loom reed space, warp sheet width and workshop layout.

5. 5.Rotary Stepless Rate Control

The operator can set the knotting rate according to yarn fineness, fiber cohesion, sizing and warp density. The listed peak rate is 600 knots per minute under the proper yarn and setup conditions.