| Model | Number of Tubes | Capacity (kg) | Total Power (kw) | Dimensions (mm) |
| (L) | (W) | (H) |
| TD-LVS-S-30 | 1/1 | 30 | 11 | 6000
| 1680 | 2300 |
| TD-LVS-S-60 | 1/1 | 60 | 15 | 7000 | 1780 | 2600 |
| TD-LVS-S-150 | 1/1 | 150 | 17 | 9200 | 1850 | 2600 |
| TD-LVS-1T | 1/1 | 250 | 23 | 11300
| 2000 | 3200 |
| TD-LVS-2T | 2/2 | 500 | 45 | 11300 | 3200 | 3200 |
| TD-LVS-4T | 4/4 | 1000 | 70 | 11300 | 5200 | 3200 |
FAQ
Q1: What is the TD-1500B designed to carry?
A1: The TD-1500B is intended for transporting warp beams and weaving beams within a textile mill. Its published load rating is 1500 kg, and its fork layout supports the beam during internal movement.
Q2: What is the difference between the TD-1500B and TD-1500A-1?
A2: The TD-1500B has a fixed published capacity of 1500 kg and overall dimensions of 3050 × 850 × 1450 mm. The TD-1500A-1 page lists a 1500–3000 kg load range and a length of 3100 mm. Beam geometry and project load should guide the model choice.
Q3: What information is needed before quotation?
A3: Please provide the loom model, beam type, loaded beam weight, barrel length, barrel diameter, flange diameter, journal dimensions, loom center height, aisle width, floor condition, local voltage and expected working hours. For Middle East mills, ambient temperature, dust conditions and charging supply should also be confirmed.
Product Advantages
1.Fixed 1500 kg Load Rating
The TD-1500B has a published carrying capacity of 1500 kg. This fixed rating gives mills a clear reference when checking loaded beam weight and planning internal beam movement.
2.Twin-Fork Beam Support
Two extended fork members provide longitudinal support beneath the handled beam assembly. The exact support position should be checked against beam length, barrel form and journal geometry.
3.Electric Beam Movement
The electric carrier platform is intended for beam movement within weaving departments. Route length, floor condition, slope and turning clearance should be included in the vehicle plan.
4.φ800–1250 mm Flange Range
The listed beam flange range is φ800–1250 mm. This parameter should be reviewed together with barrel diameter, barrel length and end-journal dimensions.
5.3050 mm Vehicle Length
The overall dimensions are 3050 × 850 × 1450 mm, with a listed aisle requirement of 1500 mm and a lifting stroke of 120 mm. These figures support mill layout and loom-side access checks.
LANGUAGE
