| Creel place | 128 |
| Motor | 2 HP |
| Max warping speed | 300 m/min. |
| Reed Width | 90" |
| Normal attachment | Yarn passing device, Yarn automatic stop device, counter,transducer.Oil presser yarn passing device |
| Beam | 5 sets |
| It can be used with Rapier Loom, Air jet Loom and other Shuttle less loom |
FAQ
Q1: Which weaving looms can use warp beams prepared by the TD968?
A1: The published machine data states that the TD968 can prepare warp beams for rapier, air jet and other shuttleless looms. The working width, beam dimensions, yarn data and loom model should be checked before confirming the machine plan.
Q2: What are the main published specifications of the TD968?
A2: The listed configuration includes 128 creel positions, a 90 inch reed width, a 2 HP motor and a warping speed of up to 300 m/min. Actual working speed depends on the yarn, package condition, section plan and operating settings.
Q3: What information is needed for a TD968 quotation?
A3: Please provide the yarn material, yarn count, total warp ends, section width, warp length, beam dimensions, loom model and planned daily output. For Middle East projects, the required voltage, frequency, workshop space and local operating conditions should also be confirmed.
Product Advantages
1.128 Position Creel Capacity
The 128 position creel arrangement supports sectional warp preparation for weaving mills handling defined yarn groups and section plans. Creel tension data should be set according to yarn material, package size and total warp ends.
2.90 Inch Reed Width
The published 90 inch reed width provides a clear reference for mills planning warp preparation within the machine range. Working width should be confirmed against the finished fabric and loom reed space.
3.Warping Speed up to 300 m/min
The listed warping speed reaches 300 m/min under matching yarn and operating conditions. Actual production depends on yarn count, package condition, section length and creel arrangement.
4.Yarn Monitoring and Length Counting
Yarn guiding, yarn break detection and length counting devices support daily process control and help operators identify interruptions during warping.
5.Loom Preparation Compatibility
TD968 prepares warp beams for rapier, air jet and other shuttleless looms. Beam dimensions, flange size and loom data should be checked before the machine arrangement is confirmed.
LANGUAGE
