| Type | TDW8100 | TDW718 | TDW508 | TDW881 | TDW851 |
| Reed space(cm) | 150,170,190,210,230,260,280,320,340,360(cm) |
| Useful reed space(cm) | Maximum reed width = reed width, minimum width reed,
door wiidth = reed -60cm |
| Frame | Both sides of the box (the main transmission part of oil bath lubrication)+intermediate beam structure |
| Driving | Brake | Direct stop mechanism by an electromagnetic brake |
| Control | Push and touch button(Arrange,run,stop,forward inching) |
| Motor | Rush start motor |
| Motor capacity | 1.5kw 1.8kw 2.2kw 2.7kw 3.2kw 3.7kw 4.5kw 5.2kw 7.2kw 7.5kw |
| Beating | Crank rocker mechanism |
| Let-off | System | Automatic mechanical and continuous let-off,or electronic let-off. One or vertical two roll |
| Warp beam | φ800mmFlange φ914mmFlange φ1000mmFlange |
| Take-up | System | Mechanical or electronic continuous take-up |
| Pick density | Normal:5-60picks/cm,special:3-70picks/cm |
Cloth width
updiameter | φ520mm,Outer coil 600mm package (optional)Maximum 800mm |
| Shedding | Plain shedding | Crank shedding(heald frame number:2 to 8)1/1 fabric |
| Cam shedding | Cam shedding(heald frame number:2-10),plain,twill,satin fabric |
| Dobby shedding | Positive/negative heald frame number:16(max),electronic and
mechanical reading system,plain,twill,satin or complex deaign |
| Jacquard | 1408 2688 5120 lifting hooks,electronic jacquard device |
Weft
insertion | Measuring
&storage | 300 TDP type mechanical measuring turbo blower
(single nozzle)or electronic weft feeder(1-6nozzles) |
| Pump | Type MS,MH,single pump or double pump structure |
| Plunger Of Pump | Φ32/φ17,φ32/φ18,φ36/φ20,Φ36/φ22,φ36/φ24,φ36/φ26
φ39/φ28,φ39/φ30,φ42/φ32,ceramic plunger |
| Nozzle Needle | T20/10,T30/10,T45/20,TL50-00,TL65-20,TL75-40,T75-40,
TL90-40 |
| Weft Filling | One,two,three,four nozzle,six nozzle |
| Filling Feeler | Photoelectric weft feeler,Fiber type |
| Selvage | Planetary gear hemming |
Electrical
part | Domestic or
imported | Main control board,AC contactor,transformer,Frequency converter, NC interface,selvage break system,waste yarn break system, overheating and overload protection |
| Electronic meter | Count and display:rotational speed,total yield,team yield,total efficiency,team efficiency,cloth length auto control,stopping. |
Other
devices | A cloth roller,a weft density gear,a trashcan,a set of nozzle needle |
FAQ
Q1: What fabrics can the TDW508 water jet loom weave?
A1: TDW508 is mainly used for hydrophobic synthetic filament yarns such as polyester and nylon. Typical products include taffeta, lining fabric, home textile fabric and light or medium industrial fabric.
Q2: What water conditions are needed for this loom?
A2: Clean and filtered process water is needed for the water jet system. Water hardness, pressure, filtration level, drainage and water reuse planning should be checked before the mill layout is prepared.
Q3: What information is needed for a loom proposal?
A3: Please share the fabric type, yarn denier, reed width, warp and weft density, nozzle quantity, weft color quantity, shedding mode, warp beam size, voltage, frequency and local water data.
Product Advantages
1.Reinforced Frame Structure
The enlarged frame and wider beam support help limit machine vibration during continuous weaving. This structure also supports steady beating and weft insertion.
2.Refined Weft Insertion System
The plunger, pump spring, nozzle and one-way valve work together to guide the water jet and weft yarn. The revised structure also helps reduce wear on the water pump.
3.Warp and Fabric Tension Management
The let-off, take-up and tension mechanisms are designed for dense synthetic filament fabrics. Mechanical and electronic motion plans are offered according to the weaving process.
4.Reed Width and Shedding Choices
Reed width options cover 150, 170, 190, 210, 230, 260, 280, 320, 340 and 360 cm. Crank, cam, dobby and jacquard shedding plans can be prepared according to the fabric design.
5.Weft and Monitoring Options
The loom can use one to six nozzles with mechanical measuring or an electronic weft feeder. Photoelectric weft sensing, cloth length counting and operating data display assist daily production management.
LANGUAGE
