Industry knowledge

This article introduces several common problems when printing knitted fabrics and also offers some solutions.

An air jet loom is described as a shuttle-less loom. It is a type of air jet weaving machine in which a jet of air is typically used by an air jet loom to propel the filling yarn through the weaving shed.

A rapier loom is a shuttleless weaving loom in which threads are interlaced utilizing small metal hooks. Rapier loom machines are generally faster and more versatile than shuttle looms. It is also more expensive. Rapier looms produce large quantities of fabric, such as in the textile industry.

Nonwoven fabrics are the fabrics that are produced directly with the use of fibers. Unlike woven fabrics, this fiber does not require to be converted into a yard to produce the final product. On the contrary, to produce them, small fibers are laid in the form of sheets and converted into fabric by bonding the fibers together.

Open-end spinning is a technology for creating yarn without using a spindle. It is also known as break spinning or rotor spinning. The principle behind open-end spinning is similar to that of a clothes dryer spinning full of sheets. If you could open the door and pull out a sheet, it would spin together as you pulled it out.

The rapier loom machine was invented in 1844 and saw continuous development throughout the years until 1925. However, during the 1950s and 1960s the machine was completely developed and commercialised the way we know it now.

Weaving machines, also known as textile machines, weaving machines, cotton spinning machines, etc., the early looms are all driven by human-powered looms. The shuttleless looms technology has been in research since the 19th century and has gradually been introduced to the international market since the 50th generation.

Inside our weaving mill there’s a machine that isn’t constantly in operation, unlike our looms. But the function it performs is a fundamental one: it’s the warper.

Carding is known as the heart of spinning in textile manufacturing process. Carding is the second process conducted in spinning after blow room followed by combining, drawing, roving, and cone winding in textile manufacturing process. Carding in spinning process cracks up the locks and the unorganized clumps present in the fiber.

Jute is a natural cellulose fibre. It is biodegradable and environment friendly fibre. It can also be recycled.

VCRO automatic winder inherits the advantages of SMARO-NEW series winder, adopts bran-new profile design - featured by beautiful and dignified, adopts the bran-new smart anti-pattering device, new type of tension control system and new type of balloon control mechanism to ensure perfect package building.